|
|
| |
Due to abuse - forum is closed and in archive mode only
LaSalle bon Dioxide
|
 Posted: 09/06/2003 at 4:48 PM Post subject: tuning peg bolts |
link
|
|
My D tuning peg came loose, so I tried to tighten it using a regular screw driver and a wrench. The screw head on the back of the headstock broke off the screw. Where would I find a screw to replace the one I broke? Are they common screws?
|
|
Back to top
|
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
|
LaSalle bon Dioxide
|
| Posted: 09/07/2003 at 1:20 PM Post subject: RE:tuning peg bolts |
link
|
|
Oh, the instrument in question is a TB 2000 bass guitar.
|
|
Back to top
|
|
|
Jon
|
| Posted: 09/19/2003 at 11:07 PM Post subject: RE:tuning peg bolts |
link
|
|
my tb1000 was missing its tuner screws. I found a standard machine screw at a local hardware store that fit. Just remove one of your existing screws and take it to Ace Hardware or some place, and you should be able to find a match.
|
|
Back to top
|
|
|
|
|
|
|
Due to abuse - forum is closed and in archive mode only
|
|
|
