gse1
Joined: 09 Jun 2005
Posts: 27
|
Posted: 04/24/2011 at 12:15 AM Post subject: Making a new aluminium neck guitar |
link
|
|
Have just started building some new jigs to make an aluinium neck with just carpenters tools. I did this before and it worked out fine but never documented anything. I am posting pictures as i progress on my facebook. I dont think ive set it to private so you should be able to see photos. If not just send friend request. So far ive made and tested the jig to do the neck (not fretboard) profile. Ive worked out how to do an eliptical curved neck as opposed to the full radius profile of a bean. Should be more like an egc's profile. Test piece of timber came out well, just a couple of minor allignment issues. Here is the photo album link
http://www.facebook.com/m.....289547.119742.1365283357#!/media/set/fbx/?set=a.2029020289547.119742.1365283357
|
|
Back to top
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
gse1
Joined: 09 Jun 2005
Posts: 27
|
Posted: 04/24/2011 at 12:21 AM Post subject: RE:Making a new aluminium neck guitar |
link
|
|
Just to add, this method is totally cost ineffective for a commercial venture but may be handy info for those who have access to decent carpenters tools and a bit of know how and are keen on building an aluminium neck without having to fork out mega bucks for metalworking machinary. Cheers Gary
|
|
Back to top
|
|
|
turn
Joined: 12 Jan 2006
Posts: 35
|
Posted: 04/25/2011 at 4:29 PM Post subject: RE:Making a new aluminium neck guitar |
link
|
|
linky gives:
"This content is currently unavailable The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page."
i'm really interested in this .. a few years ago i was thinking of going the expensive 'metalworking machinery' way but didn't.
|
|
Back to top
|
|
|
dialectric
Joined: 19 Mar 2009
Posts: 9
|
Posted: 04/25/2011 at 6:24 PM Post subject: RE:Making a new aluminium neck guitar |
link
|
|
Here's a thread with another approach, or several, to making an aluminum neck guitar. I still might try it when I get the time, though it looks like a pretty involved process:
http://www.electrical.com.....viewtopic.php?f=5&t=41840
- dialectric
|
|
Back to top
|
|
|
gse1
Joined: 09 Jun 2005
Posts: 27
|
|
Back to top
|
|
|
gse1
Joined: 09 Jun 2005
Posts: 27
|
Posted: 04/26/2011 at 1:38 AM Post subject: RE:Making a new aluminium neck guitar |
link
|
|
you will have to log in to facebook to see it though Cheers Gary
|
|
Back to top
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
|
|