guitarcharlie
Joined:
06 Jan 2008
Posts: 169
|
 Posted: 09/14/2007 at 11:37 AM Post subject: Taking a Bean apart? |
|
|
I am about to dismantle a 1000S for crack repair and refinish. Any tips or advice from anyone who has done this before?...Thanks
|
|
Back to top
|
|
|
|
|
|
djarovsky
|
| Posted: 09/14/2007 at 3:00 PM Post subject: RE:Taking a Bean apart? |
|
|
I have never done this, so I don't have any advice.
Although, please post pics of the back side of the pickups if you can....although they are probably potted and may not show much detail.
Good luck!
|
|
Back to top
|
|
|
Matt
|
| Posted: 09/16/2007 at 3:42 PM Post subject: RE:Taking a Bean apart? |
|
|
Hey, man. Send me an email at bastinguitarcompany@gmail.com and I'll shoot over some pics of my 1000A that might be helpful.
|
|
Back to top
|
|
|
blackmarker
|
| Posted: 09/20/2007 at 1:59 PM Post subject: RE:Taking a Bean apart? |
|
|
My guitar is not a real Bean, it's a copy built by Greg Bailey. The body is from a real koa Standard though. I've taken mine apart many times. Assuming the bridge attaches the same as on mine, you need to remove the saddles, unsolder the pickups and remove them, unscrew the bridge bolts and slide the neck out. I've documented disassembly here in my blog:
http://blog.myspace.com/i.....=8432066&blogID=213091148
|
|
Back to top
|
|
|
|
|
|
