DuaneFlowers
Joined:
10 Sep 2017
Posts: 8
|
 Posted: 09/19/2017 at 1:21 AM Post subject: Audio vs Linear Pots |
link
|
|
Does anyone know which were used?
TIA
|
|
Back to top
|
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
|
FranKrause
Joined:
24 Jan 2016
Posts: 27
|
| Posted: 10/24/2017 at 6:51 PM Post subject: RE:Audio vs Linear Pots |
link
|
|
As far as I know they were audio-taper pots.
|
|
Back to top
|
|
|
DuaneFlowers
Joined:
10 Sep 2017
Posts: 8
|
| Posted: 10/24/2017 at 8:04 PM Post subject: RE:Audio vs Linear Pots |
link
|
|
Thanks Frank!
I did the math and determined the same.
My volume pots were 250k and not the 500k that folks around here seem to recommend. I'm building a spare harness for mine and used 250k audio for the volume pots and 500k audios for the tones.
Also, not that it matters that much, but the tone caps are .02 and not .022 for anyone looking for historical accuracy.
|
|
Back to top
|
|
|
FranKrause
Joined:
24 Jan 2016
Posts: 27
|
| Posted: 10/24/2017 at 8:06 PM Post subject: RE:Audio vs Linear Pots |
link
|
|
Thanks for the info! Sounds like you're going for accuracy down to .002!
|
|
Back to top
|
|
|
DuaneFlowers
Joined:
10 Sep 2017
Posts: 8
|
| Posted: 10/24/2017 at 8:14 PM Post subject: RE:Audio vs Linear Pots |
link
|
|
Absolutely!!! Sill putting all the pieces together though... :-)
|
|
Back to top
|
|
|
|
|
|
