Johan
|
 Posted: 07/26/2004 at 8:45 PM Post subject: pick up bolts/screws ? |
link
|
|
Hi !
I am missing 2 of the bolts/screws that are holding the pick ups on one of my standards.
Have anyone any idea were i could find anything that would work ?
Thanks/Johan
|
|
Back to top
|
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
|
Ezra
Joined:
15 Aug 2001
Posts: 69
|
| Posted: 07/29/2004 at 11:10 AM Post subject: RE:pick up bolts/screws ? |
link
|
|
They are standard machine screws, you should be able to get them at a hardware store. I got some at a speciality fastener store.
|
|
Back to top
|
|
|
Johan
|
| Posted: 07/29/2004 at 3:39 PM Post subject: RE:pick up bolts/screws ? |
link
|
|
Thanks alot for your help !
I will check out the hardware stores in Stockholm and hope that i will find some.
Thanks/Johan
|
|
Back to top
|
|
|
Ezra
Joined:
15 Aug 2001
Posts: 69
|
| Posted: 07/30/2004 at 9:38 AM Post subject: RE:pick up bolts/screws ? |
link
|
|
Ah, Stockholm. I don't know if they are metric or not. I took one out and took it with me to the Store.
Good Luck
|
|
Back to top
|
|
|
frankintank
Joined:
01 Jun 2001
Posts: 33
|
| Posted: 07/30/2004 at 9:16 PM Post subject: RE:pick up bolts/screws ? |
link
|
|
They sure aren't metric. Size (in nuts & bolts lingo) is 1/4-20. i.e. 1/4 inch round stock with 20 threads per inch.
|
|
Back to top
|
|
|
|
|
|
