artwar
Joined:
08 Apr 2015
Posts: 39
|
 Posted: 04/28/2018 at 8:43 AM Post subject: Stripped Knobs |
link
|
|
Yesterday I purchased a beautiful original red finished Travis Bean Artist (TB1000A). A later thin body serial # above 1,000. Lucky me got it for under a thousand dollars which I barely had. Everything is perfect and in nearly new condition except all four knobs are stripped. They are the solid black type. Anyone got a fix for this ? I hope so. Or would anyone sell a set? These are the solid black version which is what I would be looking for
|
|
Back to top
|
|
|
|
Disclosure: Any links to eBay or Amazon.com are affiliate links. Affiliate links may provide commission payments to the site based on purchases.
|
|
|
|
pman
Joined:
11 Dec 2007
Posts: 23
|
| Posted: 04/29/2018 at 10:10 AM Post subject: RE:Stripped Knobs |
link
|
|
3 ways to quick fix your problem.
1. Gently put a small screw driver between the split posts of the pot and slowly expand the opening.(Be careful or you will brake the shaft.)
or
2. Wrap a thin strip of black electrical tape around the top of the pot shaft and place the knob over it.
or
3. Place a thin layer of paper around the inside circumference of the knob and slowly place it over the pot shaft.
All 3 of these have worked for me as a temporary fix.
Peace
|
|
Back to top
|
|
|
|
|
|
